• Sep

    26

    2020
  • 1
 Renovated-Kitchen image

5 Things You Need to Know Regarding Electrical Safety for DIY Projects

As a result of DIY electrical ventures, lots of damage happens each year. Most of this can be due to a lack of adequate basic information about electrical safety. This means homeowners will also be helped by well-trained and skilled electricians for their electrical problems.

You are a good DIY enthusiast if you probably boast some basic electrical knowledge that includes knowing how to change lighting fixtures, how to flip a breaker and possibly how to set your heating, ventilation and air conditioning. Yet there are a lot of things you don't know about electrical security and electricity in general.

Do-it-yourself (DIY) electrical projects can be enormously gratifying and rewarding. Saving money is arguably the biggest reason a lot of people often prefer DIY. But the results can be very detrimental if poorly conducted.

If you are currently considering tackling electrical work at home, there are a handful of safety tips you need to grasp before going even further. Here are essential DIY electrical safety tips from NextGen’s expert electricians in Londonwhich should guide you towards an experience that is both successful and injury-free.

1. The best thing you can do is kill that power

The number one thing you can do to increase your protection is to turn the connector off to the circuit on which you will be operating. You need to find and shut off the power switch that supplies electricity to the area you will be fixing. But that alone is never sufficient.

And if you may think the right connector was switched off, you can never be 100 per cent sure it was the right one. This implies that check that the circuit is free of electrical energy by checking it using a voltage tester before you dive into the DIY project. Don't take it for granted because you might possibly hit a live wire.

2. Be sure to detach yourself

You'll still face the danger of electric shock while interacting with electricity. Usually, electrical shock is caused by ineffective protected wiring or mechanical devices. Furthermore, by ensuring that your devices, clothes and the surface you are operating on show high electrical resistance, you can protect yourself against shock-induced lesions.

Reduce electrical conductivity by using tools insulated with rubber handles. In the same way, put on rubber-soled shoes and strip from your body all metal jewellery and personal electrical gadgets. Until you start on any electrical project make sure you are absolutely dry. Finally, if you are working on wet ground, you are highly advised to put down a rubber mat and step on it.

3. Have the right tools in hand

Like with every other form of DIY project, some basic tools and equipment will also be needed for electrical work. You will typically need a selection of screwdrivers, wire cutters and strippers, pliers and maybe a voltage tester. Not only will some of these tools make your work relatively easier but also safe.

You are also recommended to always carefully and correctly stripe the cables. Do not expose the stripped cable to too much extra copper because it can potentially put your safety on the line. Finally, keep your tools in good shape. When one of them is beginning to wear out, immediately replace it.

4. Use this cable detector to good effect

Were you aware that one of DIY's most common electrical errors is to accidentally drill, screw and nail metal parts into electrical cables hidden in your walls? A high-end cable detector can help locate buried wires as early as possible to avoid the possibility of an electrical shock. That means a cable detector should be an essential part of your DIY toolkit.

5. Pay attention to the power switch after finishing the job

After completing the DIY project, you're going to need to bring things back to normal. Flipping the circuit on will help you measure whether or not you did the right thing. If you have committed an electrical error, the circuit will trip right away. If this happens, don't turn it back on. Instead, seek the assistance and advice of a licensed electrician, as that means there’s a short somewhere in your wiring.

As mentioned above, all types of electrical work should be left to experts and highly qualified electrical professionals like NextGen Handyman in London. However, if you decide to take part in a DIY project, please consider these tips and improve your safety.

NextGen Handyman is your reliable partner for engaging professional handymen to tend to all your household needs. We have the resources and expert handymen for household services that include plumbing, electrics, heating & boilers, carpentry, flooring, painting refurbishment and a lot more. Let us take complete responsibility for all your housekeeping activities in London. Contact us at 0208 037 9944 or mail us to info@nextgenhandyman.co.uk.



Latest Posts
  • 12 Scrubs Lane,
    White City,
    London NW10 6RB

About Us

NextGen Handyman is a result oriented company which puts customer satisfaction first. Our skilled tradesmen are our brand ambassadors who are committed to provide you professional yet friendly service. Our price guarantee assures you are paying the best price for your job in London. And yes, we commit to rework for free if the job done by us needs further tweaks. We deliver what we promise.

© 2019 NextGen Handyman . All Rights Reserved | Design by Calyx Solutions